Instructions to prepare your local network

Phase 1: prepare your local network

Download the following files from here

Istruzioni Certificati which contains two PDFs. Both describe SSL certificates and are mainly written in Italian. to load onto the printer via the cgi-bin/upload.cgi printer service. which contains a crt file to load onto your browsers. Just double-click it.

The above factory files (points 2 and 3) provide support for three DNS names:


The above DNS names need to be added to your PC hosts file or your corporate DNS server if you have one.

Of course you can always create your own certificates using you own naming conventions. Please refer to the attached documentation.

Please use the following sequence:

a. SET 34 SSL = 1
Reboot printer.
Connect via HTTPS. Choose “Proceed” when browser mentions SSL certificate (not possible with Internet Explorer).
Upload via via upload.cgi service.
Verify webapp path is empty ( There should not be a file called fiscal_printer.pem since it is copied internally.
Restart printer.
Add IP address of printer in hosts file (C:\Windows\System32\drivers\etc\hosts) or configure your corporate DNS server if you use one.
Load Epson_Fiscal_Lab_CA_2038.crt onto your PC (double-click file).
Use URL for example and the certificate error should no longer appear.

Phase 2 - Check the settings in RoomRaccoon

Click here to double check

- if the IP address is correct.
- SSL should be active
- your department and VAT codes

Phase 3 - test your local network from RoomRaccoon

When your local network is ready, please test it from RoomRaccoon from this link by clicking on "Get printer status" button.

Phase 4 - issue and print your receipt

Open RoomRaccoon from this link
Open a reservation
Click on the + to issue a new document
Chose "Receipt" from the Type of document menù
Chose the options you want to add in the receipt
Click on "issue the document"
Go back to the reservation and click on the printer icon to send the receipt to the printer
È stato utile questo articolo?